|
|
|
 |
70ºC
|
|
|
|
 |
|
|
This alloy, one of the group of low melting point (fusible) alloys, based on Bismuth metal, is the most widely used in industry. One of its chief characteristics is expansion on solidification from the molten state, making it ideal for the support of thin-walled metal tube during bending operations. Other uses are detailed below |
|
|
|
Please see Bending Tube page for details |
|
|
|
|
|
Data |
|
|
- Weight lb/in³: Approx 0.34
- Brinell Hardness: 9.0
- Max Sustained Safe Load: 300 lbs/in²
- Growth After Casting: Up to max 0.006" Per inch
- Melting Point: Eutectic 70ºC
|
|
|
| Uses |
|
|
- Bending rolled or extended sections.
- Press tools small and large.
- Casting for reproduction of fine detail.
- Gas tight seals.
- Fusible plugs and links.
- Bending thin-walled tubing in Copper, Brass, Mild and Stainless steel.
|
|
|
| This material is available in the following forms |
|
|
- 10 Kilo ingots. Approx.
- 1.5 Kilo ingots.Approx.
- Other sizes on request
|
|
|
|
 |
|
|
 |
| © This is the web site of Lowden Metals Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Metals Ltd. You may use it only as Lowden Metals Ltd expressly permits you to. Any copying of the design or contents, or other unauthorised use, such as downloading and printing out any web pages, will infringe the rights of Lowden Metals Ltd under international treaty and English law. Lowden Metals Ltd is not responsible for the content of external Internet sites. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
